What are The Configurations of The Trigger Sprayer

Because a key learning is that, as a Mini Trigger Sprayer(KEXON) configuration takes on more locations, tasks and surfaces, it may not perform optimally in each. This awareness is compounded by a few other situational differences regarding the spray action itself.

In the kitchen, it seems as if complete coverage is not critical. Product is sprayed out here and there, and the paper towel (or, rarely, a rag) is used to spread the cleaner across the surface. Multiple trigger pumps are required, and a tilted wrist required by some trigger spray configurations can make this tiresome. But, more interesting, are the short trigger strokes used to nail a nasty spot, to get into tight spots, or to avoid spots that shouldn’t be sprayed (wood, outlets, etc.). Need for control is the insight here.

In the bathroom, complete coverage is mission-critical. Large vertical surfaces require exhaustive pumping. Full coverage is important, because higher surfaces may never be scrubbed, and contact with the cleaner may be all the cleaning power they ever get. Some users count on gravity to pull the product down the wall, cleaning as it goes. All this means lots of trigger action, and the need to disperse product both close-in and at a distance.

Multiple materials in the bathroom create additional challenges. Users don’t want cleaners to touch wallpaper or other finishes. They also need to scrub tricky objects like door tracks, handles, towel bars and faucets. What do they do? They spray the rag or towel, rather than the object. That way, the cleaner goes exactly where it’s needed.

Click Plastic Pump to learn about more information

Airless Bottle Increased Shelf Life and Cost Savings

Airless Bottle(KEXON), which reduce air exposure, can increase the shelf life of products by as much as 15 percent. Improved shelf life can translate into substantial cost savings for the buyer.

This system also contributes to cost savings by reducing, if not outright eliminating, unused product. Conventional cosmetic containers are often discarded prematurely with product remaining in the bottle. When product levels get low, the pump must be removed in order to extract cremes that may stick to the bottom of the bottle. Alternatively, the moving diaphragm feature ensures that no product goes unused.

Airless Bottle are designed to function under substantial duress and are well suited for long trips. Whereas conventional dispensers typically need to rest upright in order to function properly, airless dispensers are designed to work from any resting position. This improved functionality is incredibly helpful while traveling, when cosmetics are often transported with other items in the bottom of luggage.

Cremes and serums, particularly those used for facial skin care, are susceptible to impurities introduced by exposure to air and moisture. This problem is further compounded when using natural, preservative-free products that tend to expire more quickly. Although preservative-free products are a great addition to your cosmetics line, it is important that you select a packaging method that will provide sufficient protection to ensure the lifespan of your trusted products.

Airless Bottle also reduce the possibility of back flow, a process that occurs when air creeps back into packaging during use.

An important, though little considered, function of airless cosmetic systems is the reduction of exposure to metal components. Many conventional cosmetic pumps rely on metal springs, which can come into contact with and potentially corrupt cosmetics. Alternatively, airless pump bottles are designed with specific attention to such concerns.

Click Acrylic Bottle to learn about more information

 

About Plastic Caps

KEXON sells top quality Plastic Caps(KEXON). We provide plastic vinyl caps and grips in different styles, sizes and colors. Custom sizing and Logo printing are also available. At a glance, our various lines of Plastic Caps offer variable utility for numerous uses.

Our round vinyl caps are able to stretch and fit over different sized items. You can create a finished look to many applications in several industries

PVC caps come in a variety of sizes and shapes for a multitude of uses. Vented Pull Tabs stay put and great for items that experience pressure build up, plus they are easy to remove.

The Round Hanger Caps fit tightly around items such as tools, brooms and kitchen tools, plus they can be hung up for storage purposes.

Our Anti-Roll Caps are great to use when shipping items with or without PETG tubing. Discover how plastic caps can improve everyday living.

As first class China Plastic Cap manufacturers and Plastic Cap suppliers, perfect product apply for washing products (hand sanitizer, shampoo, shower gel, disinfectant, etc.), biological medicine, cosmetic bag makeup, chemical industry. performance characteristics, We can produce Plastic Cap according to the requirements of customers,Our products have ISO9001 quality standard, Good sealing, strong corrosion resistance,easy to use,economical and durable.

Click Lotion Pump to learn about more information

Magical Use of Shampoo Foam Bottle

Turning waste into wealth, we can turn shampoo Foam Bottle(KEXON) to useful boxes.

Turn Foam Bottle to wash boxes.First, use a marker to draw the pattern you want to cut. Then use a knife to cut along the line. Take care not to hurt your hand! After cutting, smooth the edges with sandpaper. Finally make a hole in the middle of the bottle and you’re done!

Turn Foam Bottle to soap boxes.First, place the bottle on the area to be cut, and use scissors to pull out the middle part;Light a candle and place the middle part of the shampoo bottle on the flame of the candle to soften it for easy shaping. After the center of the shampoo bottle is softened, let it cool and harden. Use a pointed tool to poke a few small ones. The holes facilitate drainage and help keep the soap dry.

KEXON can produce high quality and colorful plastic containers, including foamer bottles plastic packaging, screw bottles plastic packaging, deodorants plastic packaging and so on.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Fine Mist Sprayer to learn about more information

Wholesale Plastic Pump on Line

Plastic Pump(KEXON), Sprayers, Misters and our website you will discover: sprayers, foamer pumps with silicone brush, lotion pumps, treatment pumps, gallon pumps, airless pumps, bottle pumps to meet your requirements. Scan down the page or use our product search to find exactly what you want.

KEXON, Plastic Pump manufacturer, will tell you the instructions of bottle pumps.

1) First twist pump closely on into the Liter product jar firmly.2) While holding the pump foundation with one hand twist the spigot firmly counter clockwise to UN-lock the pump) following the pump will be UN-locked keep to pump so that the item could be primed, slightly squeeze the container (if permissible) to help in the priming procedure.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Foam Bottle to learn about more information

The Safety of PE Bottle

May be you wonot know most bottled water comes packaged in polyethylene terephthalate (PE or PETE) plastic bottles. The widespread use of these bottles, some 85 percent of which never get recycled, according to the Container Recycling Institute, has raised ire among environmentalists. But do PE Bottle(KEXON) pose a health risk? At this point, the evidence to suggest they might appears to be limited and preliminary.

Most health concerns about chemicals in plastic bottles relate to bisphenol A, that is No7 at the bottom of bottles, that is usually used in the milk bottles. That hormone-mimicking chemical, which can disturb the body’s endocrine system, has been found to leach from polycarbonate plastic, which is used to make certain sturdy, reusable water bottles (such as those that hikers often carry), baby bottles, and water coolers. But PET bottles donot contain bisphenol A, according to the National Association for PET Container Resources (NAPCOR), a trade association for the PET plastic industry. Scientific research on the potential for PET bottles to leach harmful substance is sparse.

If anything, it is the reuse of PET bottles by some consumers that may pose a problem, since the bottlesnarrow necks can make them difficult to wash. “The bigger risk to consumers is probably bacterial contamination,” says Rolf Halden, a drinking water expert and assistant professor at the Johns Hopkins Bloomberg School of Public Health.

Click Cream Jar to learn about more information

Foamed PET Bottles for Beer

Now the foam isn’t just on top of the beer, it’s all around it. Plastic Technologies, Inc. (PTI), Holland, Ohio, is making its novel oPTI lightweight foamed PET blow molding process available for beer bottles. The process can be used to produce monolayer PE Bottle(KEXON) or a combination of a foamed layer and a standard solid PET layer.

Bottle has a foamed layer inside and solid, pigmented layer outside. The brown bottle has a solid, amber PET layer inside and foamed layer outside. Dual layers allow customization of barrier properties: For example, oxygen barrier could be added to the inner layer and a carbon dioxide barrier to the outer layer. The foaming process reportedly allows up to 5% lightweighting without significant loss of performance, and it opens the door to new optical and tactile effects.

Ningbo KeXon Plastic Co., Ltd. is a comprehensive plastic packaging enterprise integrating design, production, and sales. We own a factory (Yuyao KeXon Sprayer Factory), and its plant area is over 6,000 square meters, with more than 20 years of production experience in various types of daily packaging. The company can professionally produce all kinds of foam pumps, plastic caps, daily and medicinal plastic bottles, as well as all kinds of trigger sprayers, lotion pumps, perfume sprayers, cream jar and other products.

Click Cream Jar to learn about more information

Do PE Bottle Have A Shelf Life

Do PE Bottle(KEXON) have a shelf life you may well wonder? After all glass is fragile, breaks easily and can even a crack can compromise your products. Moreover, it is heavy so costs more in terms on transport and warehousing especially if consignments go by weight. However, PE Bottle have many positives in their favor. For one thing, glass has been around for centuries, testifying to its eternal and inherent attractiveness. For the other it has excellent barrier properties.

What is the shelf life of PE Bottle?

PE Bottle on their own have an indefinite shelf life – glass is 100 percent recyclable and at any given time, as much as 20 percent of any bottle is made of recycled glass. As long as glass is not damaged, cracked or broken it lasts practically forever, never wears out and can be recycled in perpetuity. When products are packaged in glass, their shelf is enhanced because glass also offers higher barrier properties and no chemical permeation. Did you know that carbonated beverages in plastic bottles have a shorter shelf life than those of their counterparts packaged in glass? Then there are products that simply must be packaged in PE Bottle because of the inherent properties of glass or because of its aesthetic value; these include:

Wine

Liquor of all kinds

Beer

Soda

Perfumes and fragrances

Pickled foods

Jams and jellies

Pharmaceutical products

Certain chemicals

The shelf life of PE Bottle and their appearance is enhanced by different closures used. PE Bottle can take closures made of glass, cork, plastic and metal. Additionally PE Bottle can take a variety of printing and labeling options and PE Bottle can even be etched and engraved. While PE Bottle are recyclable, it is also important that their labels should be removed before reuse or recycling and the closures should be suitably recycled separately.

Click Fine Mist Sprayer to learn about more information

How to Open the Stuck Jar Lid That’s Actively Taunting You

I don’t know why I wanted to use the Cream Jar(KEXON), but I do know that as soon as I realized the lid was stuck on the jar as if it had been superglued , that was irrelevant: All I could think about was how satisfying it would be to twist that lid off.

Anyway, after mustering all of my forearm strength and straining many tendons in my neck trying to remove the lid. I took to the internet, consulting America’s Test Kitchen, Mother Nature Network,and the sometimes-dubious-but-sometimes-reliable WikiHow.The next time you’re in a fight with a stuck jar, follow this plan:

First, run the jar-lid nexus under hot water, and try twisting again. If you’re lucky, this will solve the problem.

If you’re still having trouble, do something to maximize your grippy power: Cover the lid with a dish towel or a sheet of plastic wrap before twisting; put on a plastic glove; or secure a strong, fat rubber band around the lid’s rim to give your fingers something to cling onto.

Next, try banging the jar’s lid on the side of the counter or, more safely, with a heavy utensil, in four spots (like 12, 3, 6, and 9). Some hypothesize that this will dislodge any food obstructions; others say that it will create air pockets that will make it easier to break the vacuum seal. (But in the case of my Cream Jar, it wasn’t a vacuum seal I was fighting against, but rather, gluey congealed oil.)

If none of this is working—and steam is, at this point, spewing from your cartoon ears—take more extreme action: Turn the jar upside down, submerge it in a bowl of hot water for a minute or two, and then use a boosted-traction method to twist it open. I had to refresh the water several times (to maintain its temperature) before the jar budged.

Just shatter the jar on your floor in a fit of frustration and pick out all the glass.

Click PP Bottle to learn about more information

How Does a Trigger Sprayer Work?

Many people use the Trigger Sprayer(KEXON) every day for everything from cleaning to personal grooming, but not many know how they work. A Trigger Sprayer is designed to pull liquid from the bottle using a one-way valve. The pump, powered by a trigger, forces the liquid through a nozzle that breaks up the flow of the liquid, turning it into a fine mist or stream.

Bottle

The bottle is the reservoir from which the pump pulls liquid when the user presses the trigger on the Trigger Sprayer. The liquid moves from the bottle up the tube. The tube and reservoir are similar in Trigger Sprayers and other kinds of pumps, such as pumps on soap dispensers. For thin liquids such as cleaning products, a thinner tube can work, but for thicker liquids such as hand soap, a thicker tube is necessary to pull liquid.

Pump

The pump is the main working part of a Trigger Sprayer. The pump consists of the trigger mechanism, a piston, a cylinder and a one-way valve. When the user presses the trigger, it forces the piston into the cylinder, which forces the liquid through the nozzle as a concentrated stream of liquid. When the trigger is released, the piston moves back, pulling liquid back into the cylinder. This liquid is forced out of the nozzle the next time the trigger is pressed. A one-way valve at the bottom of the pump only allows liquid to flow up the tube into the pump, not back into the bottle.

Nozzle

The nozzle of the Trigger Sprayer concentrates the liquid into a stream by forcing it through a very small hole. Trigger Sprayer nozzles also have a one-way valve in them that keeps air from flowing back into the pump and allows for suction within the pump so that liquid can be pulled up the tube. Without this valve, the pump would suck air back into the cylinder, instead of liquid up from the bottle.

Other Design Elements

Some nozzles have a built in screen with lots of tiny holes that make the liquid emerge as a mist, and some can screw down to lock the bottle and prevent fluid from escaping. The tube on some Trigger Sprayers also has a wider part at the bottom to allow for easier uptake of the fluid. Sometimes, this wider tube end has a screen over it so that solid matter doesn’t get sucked into the tube.

Click PP Bottle to learn about more information